Log homes, saunas and timber façades
Log walls, beams and other timber elements — we assess treatment options for both exteriors and interiors.
WOODEN FACADE SANDBLASTINGSurfaces change.Character stays.
LOG HOMES · WOOD · METAL · MASONRY
Every surface has
a second chance.
Mobile sandblasting for log homes, timber façades, metal and masonry. We remove old coatings and prepare surfaces for further treatment.
Wood
Metal
Masonry
We adapt the treatment to the material and its condition.
Remove the unwanted.
Preserve what matters.
AND PREPARATION FOR RESTORATIONDiscuss your project
LOG HOME SANDBLASTING
Reveal the wood’s
natural character.
Every log home has a story. We help prepare its timber surfaces for a fresh chapter — from removing old coatings to bringing out the texture of the wood.
Removing old coatings
We assess the condition of the timber and its coating. The treatment method and desired texture are agreed before work begins.
Ready for a new finish
We prepare the surface for further treatment. Discuss the choice of oil, wood stain or another protective finish with your finishing specialist.
MATERIALS & POSSIBILITIES
Not all surfaces
are the same.
We blast wood, metal, brick and concrete. Before starting, we assess the surface and choose a suitable treatment.
Choose a material to explore the treatment options.
Log homes and timber buildingsLOG HOMES＋
Log homes, saunas and timber façades
Log walls, beams and other timber elements — we assess treatment options for both exteriors and interiors. We assess the condition of the timber and its coating. The treatment method and desired texture are agreed before work begins.
Wood & timber boardsWOOD＋
Timber boards, facades and wooden elements.
Timber boards, wooden elements and other wood surfaces. Before starting, we assess the condition of the wood, the coating and whether blasting is suitable.
Metal surfacesMETAL＋
Removal of rust and old paint.
Structures, gates, railings, fences and other metalwork. We remove old coatings and prepare surfaces for further treatment. Priming is also available after metal blasting — we agree on a suitable primer and the scope of work before starting.
Metal blasting & primingTREATMENT＋
Surface cleaning and primer application.
We remove rust and old coatings, prepare the metal surface and apply primer as agreed. We discuss the primer and requirements for subsequent finishing before starting.
Brick & concreteMASONRY＋
Cleaning brick, masonry and concrete.
Brick, masonry and concrete surfaces. We assess the condition of the material and the cleaning options to agree on a suitable result.
Car parts & wheelsPARTS＋
Preparing parts for restoration.
Wheels, frames and car parts prepared for restoration. Send photographs and tell us what treatment is planned after blasting.
Other surfaces & itemsOTHER＋
An individual approach to unusual projects.
Machinery components and other items. If your project is not listed here, send us a photo — we will assess the options.
PROJECT GALLERY
Our work.
A wooden house facade and a metal fuel tank — different materials, different treatments.
BEFORE & AFTER
Beneath the old layer —
a fresh start.
A fuel tank surface before and after blasting. Old coatings and dirt give way to clean metal, ready for the next stage of treatment.
Drag the slider to see the difference.
Request a quote
AFTER
BEFORE↔
FUEL TANK SANDBLASTING DRAG THE SLIDER
STEEL WHEEL RESTORATION
From worn coatings
to a fresh look.
Steel wheels before treatment and after restoration. Rust and old coatings — alongside the finished result.
METAL PART SANDBLASTING
From rust
to a clean surface.
A metal part before and after sandblasting. Rust and old coatings removed to prepare the surface for further treatment.
OUR APPROACH
Understand first.
Then blast.
An old surface can find a new purpose. We start by assessing the material and agreeing on the result — from revealing wood grain to removing old coatings.
Attention to detail
We adapt the treatment to the surface material, its condition and the intended result.
Blasting for components
We remove old coatings to prepare the surface for further restoration.
Clear project pricing
We assess photographs, dimensions and the scope of work before agreeing on a price.
Direct communication
Call us to discuss the options, project details and arrangements for handing over your items.
FROM IDEA TO RESULT
From the first photo
to a clean surface.
Show us what needs restoring
Add photos, a description and approximate dimensions.
Agree on the work
We discuss the treatment, scope of work and price.
Carry out the blasting
We carry out the agreed treatment on site or arrange for you to bring in the parts.
LET’S START WITH A CONVERSATION
Get a quote
for your project.
Tell us what you would like to restore. Add a few photos and approximate dimensions to help us assess the scope of work.
+371 29416844Prefer to discuss it directly? Give us a call.
[email protected]
SIA “R Logistics”
Registration No. 40103300586
Paula Lejiņa iela 1–44, Rīga, LV-1029
Registration No. 40103300586
Paula Lejiņa iela 1–44, Rīga, LV-1029
BEFORE WE START
Frequently asked questions
About materials, project preparation and requesting a quote.
Can an old log home be sandblasted?
We assess the options based on the condition of the logs and the existing coating. Send an overall view of the walls and close-up photos. Before work starts, we agree on the desired texture and whether a small test area is needed.
What should I include in a log home quote request?
Include the site location, approximate surface area and whether the work is indoors or outdoors. Add photos of the walls and close-ups of the coating, and describe your intended finish.
Can metal be primed after blasting?
Priming is also available after metal blasting. We agree on a suitable primer, surface preparation requirements and the timing before starting. Let us know in your enquiry if you would like blasting and priming together.
What is sandblasting?
It is a surface treatment using abrasive material propelled by compressed air. It removes old coatings, rust and stubborn dirt, and prepares the surface for further treatment.
Which surfaces can be blasted?
Wood, metal, brick and concrete. We assess whether blasting is suitable for each project individually — the material, its condition and the coating to be removed all matter.
Can a wooden facade or timber boards be blasted?
Yes, if the condition of the wood and its coating are suitable. Blasting can change or accentuate the wood grain. Before starting, we discuss the desired appearance and whether a small test area is needed.
Can blasting damage a surface?
An unsuitable abrasive or treatment setting can alter the surface texture and damage delicate materials. We therefore assess the surface and agree on the treatment before starting. Thin components and soft wood require particular care.
Do you travel to the site?
We offer mobile sandblasting. Send us the site location and photos — we will agree on access, working conditions and the options for an on-site visit.
How much does blasting cost?
The price depends on the surface area, material, old coating, access and work location. To receive a quote, send photographs, approximate dimensions and the site location.
How long does the work take?
This depends on the scope of work, coating and access to the surface. We discuss the schedule after receiving your project description and photographs. Outdoor work also depends on the weather.
How should I prepare the site?
Provide access to the surface and move nearby belongings. We agree on protecting windows, delicate elements and adjacent surfaces, as well as other preparation, before visiting the site.
Does blasting create dust?
Blasting produces abrasive particles and debris from removed coatings. We discuss isolating the work area and protecting the surroundings in advance, taking the location and material into account.
Does the surface need painting after blasting?
Further treatment depends on the material and its use. Cleaned steel needs suitable corrosion protection; wood finishes are chosen to suit the desired result. It is best to agree on the next treatment stage before starting.
How can I send photos for a quote?
Complete the quote request form and attach up to 5 photos (up to 10 MB in total). Click “Send enquiry” to email the details and photos to [email protected]. You can also email us directly or send photos via WhatsApp.
Still have a question? Call +371 29416844
COMPANY INFORMATION
Company details
- Company
- SIA “R Logistics”
- Registration number
- 40103300586
- Registered address
- Paula Lejiņa iela 1–44, Rīga, LV-1029
- [email protected]
- Bank
- Citadele banka AS
- Bank account (IBAN)
- LV68PARX0026899210001